whats-app
  • 1/B, Ground Floor, Siddhi Apartment,
    10th Khetwadi Back Road, Mumbai 400 004

Monel 400 Round Bar

Monel 400 Round Bar
  • Sizes in Stock: 3 - 600 mm
  • Known for : Excellent Resistance to Seawater
  • Suitable Acid : Sulfuric and Hydroflouric Acid
  • Ultimate Tensile Strength : 79 Ksi
  • Used for : Marine Engineering
  • Environments : Severely Acidic and Alkaline
  • Advantages : High Resistance to Corrosion
  • Steel Types : Nickel-copper Alloy
  • Shear Strength : 53
  • Machinability : 22%
  • Sample : Free Sample Can Be Sent For Test
  • Melting Point : 2370 - 2460°F
  • Features : Good Workability
  • Conditions : Annealed & Hot Finished

Cut to Lengths Monel Round Bar Supplier in India


Table of Content


Specification of Monel 400 Round Bar

Monel 400 Round Bar Sizes

Monel 400 Round Bar Sizes

  • Length: 0.5 - 6 m
  • Diameter: 3 - 600 mm
  • Custom Available
Flat Bar Sizes

Alloy 400 Flat Bar Sizes

  • Thickness: 0.5 - 200 mm
  • Length: 0.5- 6 m
  • Width: 1.5 - 250 mm
Square Bar Sizes

WNR 2.436 Square Bar Sizes

  • Length: 0.5 - 6 m
  • Side width: 2 - 200 mm
  • Custom Available
Hex Bar Sizes

UNS N04400 Hex Bar Sizes

  • Length:0.5 - 6 meter
  • Inscribed Diameter: 3 - 180 mm
  • Custom Available
Documentation

Monel Alloy 400 Polished Bar Documentation

  • MTC EN 10204 3.1
  • Third Party Inspection Report
  • 100% Radiography Test Report
Round Bar Testing

2.4360 Monel Cold Drawn Bar Testing

  • Step-Down Tests
  • PMI Test
  • Upset Testing

Shape

WNR 2.436 Peeled Round Bars Shape

  • Round
  • Hex, Square
  • Rectangle
Physical Properties

Monel 400 Rod Physical Properties

  • Density: 8.80 g/cm(3)
  • Melting Point: 2370-2460° F
  • Temprature Range: up to 1000° F
Marking

EN 2.4360 Half Round Bar Marking

  • Nominal Size
  • Method of Manufacturing etc.
  • Material Grade
Tolerances

N04400 Monel Deformed Bar Tolerances

  • H8 to H13
  • K9 to K12
Finish

Alloy 400 Threaded Bar Finish

  • Black
  • Rough Turned
  • Polished
  • Pickled
  • NO.4, Bright
Origin

Monel 400 Hexagonal Bar Origin

  • Indian
  • Japanese
  • American
  • Korean
  • European
Services

Nickel Alloy 400 Forged Bar Services

  • Shearing
  • Cutting
  • Heat Treatment
Method

WNR 2.436 Peeled Round Bars Method

  • Forged
  • Rolled

Packaging

Nicorros LC Bright Bar Packaging

  • Custom
  • Bubble wraps
  • Wooden Boxes

Condition

Monel 400 Annealed Bar Supply Condition

  • H&T
  • PH
  • ANN


Get Readily Available Stock of Custom Sizes UNS N04400 Rod At Fair Price


What Factors Should Be Considered When Choosing a Monel Round Bar Supplier in India?

What Factors Should Be Considered When Choosing a Monel Round Bar Supplier in India?

American Standard of Monel 400 Rod

  • ASTM B164
  • DIN 17753
  • ASM 4731
  • AMS 4675
  • BS3076NA13
  • UNS N04400
  • AMS 4730
  • QQ-N-281
  • VdTUV 263

Stockist Of Alloy 400 Flat Bar in Hot and Cold Rolled For Marine Applications


Why Are Monel 400 Round Bar Best Choice For Marine Applications?

Why Are Monel 400 Round Bar Best Choice For Marine Applications?

Monel 400 Round Bar Weight Calculator

Daimeter in (Inches) Daimeter in (Millimeter) Weight in (lbs/ft)
23/32 18.2372 1.55
21/32 16.6624 1.29
19/32 15.0622 1.06
17/32 13.4874 0.846
15/32 11.8872 0.649
13/32 10.3124 0.495
11/16 17.4498 1.42
9/16 14.2748 0.948
7/16 11.0998 0.574
5/8 15.875 1.17
3/8 9.525 0.421
1/2 12.7 0.749

Weight Chart of UNS N04400 Hex Bar

Sizes (Inches & Millimeter) Weight in (kg/m)
11 mm 0.748
10 mm 0.620
9 mm 0.498
8 mm 0.398
7 mm 0.298
7/32″ 0.190
6 mm 0.223
5 mm 0.154
5/32″ 0.095
5/16″ 0.387
4 mm 0.098
3 mm 0.055
3/16″ 0.141
3/8″ 0.557
1/8″ 0.062
1/4″ 0.249

What Quality Assurance Procedures Are in Place for Monel Bar Stock?

What Quality Assurance Procedures Are in Place for Monel Bar Stock?

Key Benefits of Nickel 400 Bar

  • High Strength and Toughness
  • Good Weldability
  • Magnetic Properties
  • Exceptional Corrosion Resistance
  • Stress-Corrosion Cracking Resistance

Monel 400 Square Bar Testing Requirements

Monel 400 Square Bar Testing Requirements

Offer Superior Resistance Nickel Alloy 400 Hex Bar Suitable to Work at 550°C Temperature

Conditions of Monel 400 Flat Bar

PH Precipitation Hardened
H & T Hardened & Tempered
ANN Annealed

Alloy 400 Square Bar Surface Finishes

PR Peeled & Reeled
 ST Smooth Turned
HF Hot Finished CG Centreless Ground
SRE Slit Rolled Edge BD Bright Drawn
RT Rough Turned/peeled P Peeled
P Polished CD Cold Drawn
HRAP Hot Rolled Annealed and Pickled CF Cold Finished

Applications of Alloy 400 Round Bar

Applications of Alloy 400 Round Bar

Documentations of Monel 400 Bar Stock

  • Material Traceability Records
  • Certificate of Origin
  • Heat Treatment Charts
  • Material Test Certificates
  • Commercial Invoice which includes HS Code
  • NABL approved Laboratory Test Reports
  • Quality Assurance Plan (QAP)

Nickel Alloy 400 Flat Bar Tension Impact Strength

Conditions Impact Strength, in (ft•lb)
Izod Charpy U Notch
Annealed 90-120+ 215
Hot-Rolled 100-120+ 220
Forged 75-115 -
Cold-Drawn 75-115 150

Equivalent Stanadrds of Monel 400 Round Bar

Russia (GOST)

Russia (GOST)

  • МНЖМц 28-2,5-1,5
American (UNS)

American (UNS)

  • UNS N04400
USA (Werkstoff No)

USA (Werkstoff No)

  • WNR 2.4360
European (EN)

European (EN)

  • NiCu30Fe
England (BS)

England (BS)

  • NA 13
Japan (JIS)

Japan (JIS)

  • NW 4400
France (AFNOR)

France (AFNOR)

  • NU-30M

Alloy 400 Round Bar Chemical Composition

Stainless Steel 316L Fasteners Chemical Composition

  • Manganese (Mn) = 2.0% (Maximum)
  • Phosphorus (P) = 0.05%
  • Carbon (C) = 0.0 To 0.03% (Maximum)
  • Silicon (Si) = 1.00% (Maximum)
Stainless Steel 316L Fasteners Chemical Composition

  • Nickel (Ni) = 8.00% to 10.50%
  • Iron (Fe) = Balance
  • Sulfur (S) = 0.03%
  • Chromium (Cr) = 17.50% to 19.50%


Monel 400 Rod Mechanical Properties

Material Tensile Strength Yield Strength (0.2%Offset) Elongation Density Melting Point
MPa Psi MPa Psi % g/cm3 °C °F
Monel 400 550 80,000 240 MPa 35,000 Psi 40 % 8.8 g/cm3 1350 °C 2460 °F

Monel Round Bar Size Chart

Sizes in (Inches) WT / ft
15/16″ 2.625
13/16″ 1.950
11/16″ 1.390
7/8″ 2.300
5/8″ 1.150
3/4″ 1.660
3″ 26.53
2-3/8″ 16.920
2-1/4″ 14.920
2-1/2″ 18.42
2″ 11.80
1-7/8″ 10.400
1-5/16″ 5.100
1-5/8″ 7.800
1-1/2″ 6.625
1-1/8″ 3.700
1″ 2.90
1/2″ 0.740

Find Source Of WNR 2.436 Square Bar and Shaft With Best Welding Technique

Monel 400 Rod Dimensions

Metric Japanese US Bar
Sizes Outside Daimeter in (Millimeter) Sizes Outside Daimeter in (Millimeter) Sizes Outside Daimeter in (Inches)
20 20 44 44 14 1.750
22 22 48 48 15 1.875
25 25 51 51 16 2.000
28 28 57 57 18 2.250
18 18 41 41 13 1.625
16 16 38 38 12 1.500
14 14 35 35 11 1.375
12 12 32 32 10 1.250
11 11 29 29 9 1.125
10 10 25 25 8 1.000
9 9 22 22 7 0.875
8 8 19 19 6 0.750
7 7 16 16 5 0.625
6 6 13 13 4 0.500
5 5 6 6 2 0.250

Monel 400 Rod Manufacturing Process

Monel 400 Rod Manufacturing Process

Thermal Properties of Monel 400 Bar

Temp Thermal Conductivity Mean Linear Expansion Electrical Resistivity,c Specific Heat
°C °F W/m•°C Btu-in/h/ft2/°F mm/m•°C in/in/°F x 10-6 mL•m ohm-circ mil/ft J/kg•°C Btu/lb/°F
1000 2000 - - 18.1d 10.3d 0.692 427 - -
900 1800 48.8d 360d 17.7 10.0d 0.675 415 - -
800 1600 45.5d 335d 17.4 9.8 0.658 403 - -
700 1400 42.4 311 17.0 9.6 0.639 391 - -
600 1200 39.4 287 16.6 9.3 0.620 379 - -
500 1000 36.5 264 16.3 9.1 0.603 367 - -
400 800 33.4 238 16.1 8.9 0.587 355 - -
300 600 30.1 215 15.7 8.8 0.574 346 470 0.114
200 400 26.9 193 15.2 8.6 0.559 337 459 0.110
100 200 24.0 167 14.2 7.7 0.537 322 445 0.105
21 70 22.0 151 - - 0.511 307 427 0.102
-70 -100 19.8 139 12.1 6.7 - - 378 0.088
-130 -200 18.2 130 11.4 6.4 - - 320 0.078
-180 -300 16.5 113 11.1 6.1 - - 223 0.050
-200 -320 - - - - .360 205 - -

WNR 2.436 Polished Bar ISO Tolerances

ISO Tolerance Sizes in (Millimeter)
h11, h11-DIN 1013 40 – 150
h9-h10-h11 20 – 50
h8-h9-h10-h11 10 – 75
h8-h9-h10-h11 3 – 75

What are the Heat Treatment Options for Nickel 400 Rectangular Bar?

Heat Tteatment Temprature
Stress Relieving 600°C to 700°C
Hot Working 1,100°C & 1,200°C
Annealing 900°C to 1,000°C
Cold Working -
Hardening Rapid cooling
Solution Annealing 1,000°C & 1,100°C

Monel Round Bar Tolerances

Material Condition Diameter Tol. in (over(+)/under(-)) Specific Dia., (Inches).
Monel 400 Cold Drawn - 0.005" Over 2.5 to 3, incl.
- 0.004" Over 1.9375 to 2.5, incl.
- 0.003" Over 0.9375 to 1.9375, incl.
- 0.003" 0.1875 to 0.5, excl.
- 0.002" 0.5 to 0.9375, incl.

Types of Monel 400 Round Bar

Monel 400 Rod

Monel 400 Rod

Alloy 400 Flat Bar

Alloy 400 Flat Bar

UNS N04400 Hex Bar

UNS N04400 Hex Bar

WNR 2.436 Square Bar

WNR 2.436 Square Bar

Nickel Alloy 400 Rectangular Bar

Nickel Alloy 400 Rectangular Bar

Nicorros LC Bright Bar

Nicorros LC Bright Bar

Nickel 400 Rounds

Nickel 400 Rounds

Phyweld 400 Shaft

Phyweld 400 Shaft

ASTM B164 UNS N04400 Billet

ASTM B164 UNS N04400 Billet

Alloy 400 Bloom

Alloy 400 Bloom

Monel Alloy 400 Polished Bar

Monel Alloy 400 Polished Bar

2.4360 Monel Cold Drawn Bar

2.4360 Monel Cold Drawn Bar

Monel 400 Annealed Bar

Monel 400 Annealed Bar

WNR 2.436 Peeled Round Bars

WNR 2.436 Peeled Round Bars

Nickel Alloy 400 Forged Bar

Nickel Alloy 400 Forged Bar

Nickel 400 Hot Rolled Bars

Nickel 400 Hot Rolled Bars

Alloy 400 Threaded Bar

Alloy 400 Threaded Bar

Monel 400 Hexagonal Bar

Monel 400 Hexagonal Bar

UNS N04400 Triangle Bar

UNS N04400 Triangle Bar

EN 2.4360 Half Round Bar

EN 2.4360 Half Round Bar

N04400 Monel Deformed Bar

N04400 Monel Deformed Bar