• 1/B, Ground Floor, Siddhi Apartment,
    10th Khetwadi Back Road, Mumbai 400 004

Duplex Steel S32205 (F60) Washers

Duplex 32205 Washers are offered in various dimensions, shapes, and sizes. The metallurgical structure consists of two phases, austenite and ferrite, in approximately equal proportions; hence, it is called duplex steel. Duplex steel is about twice as durable and has significantly better toughness and flexibility than regular stainless steel. It shows high corrosion cracking and pitting resistance. The lower nickel content makes it better for thermal conductivity than the austenitic grades.

These Duplex 32205 washers are used in marine, power generation, and chemical industries. Also, the Duplex F60 washers are in all custom and standard dimensions for multiple applications. These washers are designed and prepared under the set industrial norms. It comes with a high-quality surface finish. Further, these washers show high workability, formability, machinability, fabricability, weldability, etc. Due to the fabricability property, these are easily modified into intricate designs. These Duplex F60 washers have low machining cost because of good machinability.

Table of Content

Duplex Steel S32205 Washers
Duplex S32205 Washers
A479 Duplex Steel S32205 Washers

Duplex Steel F60 Washers Supplier, Duplex Stainless Steel S32205 Washers in India, UNS S32205 Washers Material, Grade F60 (S32205) Washers, DSS S32205 Washers, 1.4462 Washers, Duplex Steel S32205 Washers, Duplex Steel Washers Manufacturers in Mumbai, India.

Dalloyed Works is one of the leading industries in the manufacturing sector of high-quality Duplex 32205 (F60) Washers. Our purpose is to meet the requirements of our customers regarding industrial products. These Duplex F60 washers are tested on various parameters before it is delivered to customers. Our high-grade washers are tested by performing many destructive and non-destructive tests during the manufacturing process, which helps to deliver perfectly suitable solutions to our esteemed clients.

Duplex Steel S32205 Plain Washers

Duplex Steel S32205 Plain Washers

Duplex Steel S32205 Flat Washers

Duplex Steel S32205 Flat Washers

Duplex Steel S32205 Ogee Washers

Duplex Steel S32205 Ogee Washers

Duplex Steel S32205 Split Washers

Duplex Steel S32205 Split Washers

Duplex Steel S32205 Dock Washers

Duplex Steel S32205 Dock Washers

Duplex Steel S32205 Square Washers

Duplex Steel S32205 Square Washers

Duplex Steel S32205 Washers Exporter, Duplex Steel S32205 Washers Supplier, Duplex Steel S32205 Washers Manufacturer, Duplex Steel F60 Flat Washers, Duplex Steel S32205 Round Plate Washer, Duplex Steel S32205 Plain Washers, Duplex Steel S32205 Star Washers, Duplex Steel S32205 Washer Suppliers, SAF 2205 Square Washers, Ferritic Stainless Steel F60 Ogee Washers, Duplex Steel S32205 Square Plate Washer, Duplex Stainless Steel 2205 Split Washers, ASTM A479 Duplex Steel F60 Washers Dealer, Duplex F60 Spring Washers, Duplex Steel S32205 Beveled Washer, ASTM A182 S32205 F60 Lock Washers Distributors, Duplex Steel S32205 Hardened Round Washer, Duplex Steel S32205 Tapper Washer, S32205 Duplex Steel Fender Washers Supplier in India.

Next Washers Products : Super Duplex S32750 (F53) 

Duplex Steel S32205 (F60) Washers Specification

Duplex Steel S32205 Washers Specifications ASTM A479, ASME SA479
Standard of Duplex Steel S32205 Washers DIN, ASTM, BS and all International Standards
F60 Duplex Steel Washers Length 3 mm to 200 mm
S32205 Duplex Steel Washers Size M3 - M56 | 3/6" to 2" | Custom Sizes
Duplex Steel Grades Duplex S32205
Duplex Steel S32205 (F60) Washers Type Plain Washer, Spring Washer, Tooth Washer, Tapper Washer, Tab Washer, Star Washer, Square dock washer, Spherical washer, USS flat washers, SAE flat washers, Bonded sealing washers, Lock washers external tooth, Lock washers internal tooth, Structural washers F436, Fender washer, Lock washers, spring lock washer, High collar lock washer, Finishing washers, Dock washers, Belleville washers, Wave washers.

India’s Largest Duplex Steel S32205 Washers Manufacturers in India, Duplex F60 Washer Supplier in Mumbai, S32205 Duplex Steel Washers Distributor in India.

Equivalent Grades of Duplex Steel S32205 (F60) Washers

STANDARD WERKSTOFF NR. UNS
Duplex 2205 1.4462 S32205

Other Types Of Duplex Steel S32205 (F60) Washers

Duplex Steel S32205 (F60) Fasteners ASTM Standard
ASME B18.21.1 Lock Washers ASME B18.13 Washer Assemblies (Sems)
ASME B18.23.1 Beveled Washers ASME B18.22.1 Plain Washers
UNS S32205 Washers Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
S32205 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 21.0 – 23.0 2.50 - 3.50 4.50 – 6.50 0.8 – 0.20 63.54 min
ASTM A479 Duplex Steel S32205 (F60) Washers Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S32205 7.805 0.285 1420 – 1465 2588 – 2669
Duplex Steel S32205 Washer Physical Properties
Density
lbm/in3
Electrical
Resistivity
mW•in
Electrical
Resistivity
(in x 10-6)
Heat
Capacity
BTU/lbm•°F
Thermal
Conductivity
(BTU/hr•ft•°F)
  
at 68°F
0.278
0.112
8.7
27.6
33.5
at 212°F
0.119
9.2
26.1
35.4
at 392°F
0.127
9.8
25.4
37.4
at 572°F
0.134
10.4
24.9
39.4
Duplex Steel UNS S32205 Washers Size Chart
Size
USS
 SAE
Inside Diameter
(A)
Outside Diameter
(B)
Thickness
(C)
Inside Diameter
(A)
Outside Diameter
(B)
Thickness
(C)
#2
3/32″
1/4″
0.020″
#4
1/8″
5/16″
0.032″
#6
5/32″
3/8″
0.049″
#8
3/16″
7/16″
0.049″
#10
7/32″
1/2″
0.049″
#12
1/4″
9/16″
0.065″
1/4″
5/16″
0.734″
0.065″
9/32″
5/8″
0.065″
5/16″
3/8″
7/8″
0.083″
11/32″
11/16″
0.065″
3/8″
7/16″
1″
0.083″
13/32″
13/16″
0.065″
7/16″
1/2″
1-1/4″
0.083″
15/32″
15/16″
0.065″
1/2″
9/16″
1-3/8″
0.109″
17/32″
1-1/16″
0.095″
9/16″
5/8″
1-15/32″
0.109″
19/32″
1-5/32″
0.095″
5/8″
11/16″
1-3/4″
0.134″
21/32″
1-5/16″
0.095″
3/4″
13/16″
2″
0.148″
13/16″
1-15/32″
0.134″
7/8″
15/16″
2-1/4″
0.165″
15/16″
1-3/4″
0.134″
1″
1-1/16″
2-1/2″
0.165″
1-1/16″
2″
0.134″
1-1/8″
1-1/4″
2-3/4″
0.165″
1-1/4″
1-3/8″
3″
0.165″
1-3/8″
1-1/2″
3-1/4″
0.180″
1-1/2″
1-5/8″
3-1/2″
0.180″
1-5/8″
1-3/4″
3-3/4″
0.180″
1-3/4″
1-7/8″
4″
0.180″
2″
2-1/8″
4-1/2″
0.213″
    
People Search For Duplex S32205 (F60) Washers

duplex s32205 washers price list, duplex steel 2205 tab washers, duplex steel washers grade s32205 price list, duplex s32205 washers stock, duplex steel s32205 washers in mumbai, duplex s32205 washers suppliers in India, 2205 duplex steel star washers Stockist, duplex s32205 washers manufacturer in mumbai, duplex s32205 washers specification, s32205 duplex steel spring washers grade, s32205 duplex washers dealers in mumbai, s32205 duplex steel washers, duplex steel f60 washers supplier, duplex stainless steel s32205 washers manufacturers in mumbai, s32205 duplex steel washer strength, duplex f60 washers supplier in india, type s32205 duplex steel washers, ferritic stainless steel s32205 duplex steel washers exporter, duplex steel f60 washers manufacturers in india, s32205 duplex plain washers, s32205 duplex steel washers cost, duplex steel s32205 washer grades chart, s32205 duplex taper washers india, duplex steel f60 washer dimensions chart pdf, f60 duplex square washers in mumbai, duplex f60 ogee washers standard.

Application of Duplex Steel S32205 (F60) Washers
  •  Duplex Steel S32205 Washers uses in Petrochemicals
  •  F60 Duplex Steel Washers uses in Marine
  •  Duplex Steel 2205 Washers uses in Power Generation
  •  Duplex S32205 Washers uses in Aircraft Exhaust Manifolds
  •  S32205 Duplex Stainless Steel Washers uses in Pharmaceutical Equipment
  •  Duplex Stainless Steel F60 Washers uses in Oilfield in drilling rigs etc.
  •  UNS S32205 Washers uses in Gas Processing
  •  Ferritic Stainless Steel S32205 Washers uses in Replacement parts
  •  Duplex Steel S32205 Washers uses in Heat Exchangers
  •  Duplex Steel F60 Washers uses in Pharmaceuticals
  •  EN 1.4462 Washers uses in Turbine & Power Generation
Industry
Worldwide Supplier of Duplex Steel S32205 (F60) Washers
  • Supply of Duplex Steel S32205 (F60) Washers in Countries Like
    World Map
    Iran, Oman, Egypt, Yemen, Croatia, United States, Iran, Russia, Morocco, United Kingdom, Costa Rica, Argentina, Israel, Belgium, Spain, Ghana, Serbia, Angola, Poland, Turkey, Hong Kong, Brazil, Bolivia, Canada, Bahrain, Tunisia, Italy, Belarus, Nigeria, Libya, Bulgaria, Ukraine, France, Denmark, Australia, Singapore, Trinidad & Tobago, Vietnam, Estonia, Japan, Saudi Arabia, Czech Republic, Philippines, Sweden, New Zealand, South Africa, Greece, Kenya, Austria, Lithuania, Portugal, Bangladesh, Romania, Qatar, Sri Lanka, Algeria, Hungary, Mexico, Bhutan, Chile, Mongolia, Kazakhstan, South Korea, Poland, Colombia, Switzerland, Nigeria, Pakistan, Kuwait, Iraq, Gabon, Slovakia, United Arab Emirates, Azerbaijan, China, Lebanon, Netherlands, Finland, Indonesia, Jordan, Venezuela, Ecuador, Mexico, Thailand, Norway, Chile, Peru, Malaysia, Afghanistan, Taiwan.

Get in Touch

You will find yourself working in a true partnership that results in an incredible experience, and an end product that is the best.

Call us on

+91 2267496246

Email us

sales@dalloyedfasteners.com